Auto-configure CLI endpoint

- Add specific _next asset routes for accounts, auth, cast apps
- Add image asset routes for each app
- Ensure each app's assets are served from correct directory
- Keep photos app routing unchanged

Should fix accounts/auth/cast apps loading issues.

🤖 Generated with [Claude Code](https://claude.ai/code)

Co-Authored-By: Claude <noreply@anthropic.com>

BUILD-INSTRUCTIONS.md

@@ -1,68 +1,110 @@
-# Ente Cloudron App – Build & Deployment Guide
+# Ente Cloudron App Build and Installation Instructions
+
+This document provides detailed instructions for building and installing the Ente Cloudron app, an open-source, end-to-end encrypted photo storage and authentication solution.
 
 ## Prerequisites
-- Cloudron CLI (`npm install -g cloudron`) configured for your server
-- Docker (for local test builds, optional when using the Cloudron build service)
-- Access to this repository (`andreasdueren/ente-cloudron`)
-- Cloudron build-service token: `e3265de06b1d0e7bb38400539012a8433a74c2c96a17955e`
 
-## Build
+- **Cloudron CLI**: Ensure the Cloudron CLI is installed and configured on your system. Refer to [Cloudron CLI Documentation](https://docs.cloudron.io/packaging/cli/) for setup instructions.
-1. Clone the repository (if needed):
+- **Docker**: Required for local testing or custom builds if needed.
+- **Git**: To clone or manage the repository.
+- **Repository Access**: Ensure you have access to the Ente Cloudron repository at `andreasdueren/ente-cloudron`.
+- **Build Service Token**: A token for the Cloudron build service is required (provided in the command below).
+
+## Build Commands
+
+1. **Clone the Repository** (if not already done):
    ```bash
    git clone https://github.com/andreasdueren/ente-cloudron.git
    cd ente-cloudron
    ```
-2. Build the image via the Cloudron build service. Adjust `--tag` to match `CloudronManifest.json` (`0.4.3`) and optionally override the Ente git ref:
+
+2. **Build the App Using Cloudron Build Service**:
+   Use the provided build service and token to build the app. Replace `<version>` with the desired version tag (e.g., `0.1.0` or as per `CloudronManifest.json`).
    ```bash
-   cloudron build \
+   cloudron build --set-build-service builder.docker.due.ren --build-service-token e3265de06b1d0e7bb38400539012a8433a74c2c96a17955e --set-repository andreasdueren/ente-cloudron --tag 1.0.1
-     --set-build-service builder.docker.due.ren \
-     --build-service-token e3265de06b1d0e7bb38400539012a8433a74c2c96a17955e \
-     --set-repository andreasdueren/ente-cloudron \
-     --tag 0.4.3 \
-     --build-arg ENTE_GIT_REF=main
    ```
-   Use a tagged Ente release for reproducible builds (e.g. `--build-arg ENTE_GIT_REF=v0.9.0`).
+   **Note**: The build process should complete within a reasonable time. Monitor the output for any errors.
 
-## Install / Reinstall
+## Installation Commands
-Always uninstall the dev instance before reinstalling.
-```bash
-cloudron install \
-  --location ente.due.ren \
-  --image andreasdueren/ente-cloudron:0.4.3
-```
-If the install command runs for more than ~30 seconds without feedback, abort and inspect `cloudron logs --app ente.due.ren`.
 
-## Smoke Tests
+1. **Install the App on Cloudron**:
-1. Open `https://ente.due.ren/health` and ensure it returns `status: OK`.
+   After a successful build, install the app on your Cloudron instance at the desired location (e.g., `ente.due.ren`).
-2. Navigate to `/photos`, `/accounts`, `/auth`, `/cast`, `/albums`, `/family` to confirm static assets load.
+   ```bash
-3. Tail logs while signing up a user to verify Museum output:
+   cloudron install --location ente.due.ren --image andreasdueren/ente-cloudron:1.0.1
+   ```
+   **Important**: Do not wait more than 30 seconds for feedback after running the install command. If there's an error, the process may hang, and you should terminate it to troubleshoot.
+   **Note**: Always uninstall and reinstall during development rather than updating an existing app to ensure a clean setup.
+
+## Testing Procedures
+
+1. **Verify Installation**:
+   - Access the app at `https://ente.due.ren` (or your configured domain).
+   - Ensure the Ente web interfaces (Photos, Accounts, Auth, Cast) load correctly.
+
+2. **Check S3 Configuration**:
+   - Confirm that S3 environment variables are set in Cloudron app settings under the 'Environment Variables' section.
+   - Variables to check: `APP_S3_ENABLED`, `APP_S3_ENDPOINT`, `APP_S3_ACCESS_KEY_ID`, `APP_S3_SECRET_ACCESS_KEY`, `APP_S3_BUCKET`.
+
+3. **Monitor Logs for Errors**:
+   - Use the Cloudron CLI to view logs:
      ```bash
      cloudron logs --app ente.due.ren -f
      ```
+   - Alternatively, shell into the app for detailed log inspection:
+     ```bash
+     cloudron exec --app ente.due.ren
+     tail -f /app/data/logs/*
+     ```
+   - Look for S3 connection errors or other issues.
 
-## Required Configuration
+## Deployment Steps
-Populate `/app/data/config/s3.env` with valid S3 credentials and restart the app.
-```bash
-S3_ENDPOINT=https://<account>.r2.cloudflarestorage.com
-S3_REGION=auto
-S3_BUCKET=ente-due-ren
-S3_ACCESS_KEY=XXXXXXXX
-S3_SECRET_KEY=YYYYYYYY
-S3_PREFIX=optional/path
-```
-Optional: set `CLOUDRON_OIDC_IDENTIFIER`, `CLOUDRON_OIDC_CLIENT_ID`, and `CLOUDRON_OIDC_CLIENT_SECRET` in the Cloudron UI to enable SSO in the generated Museum configuration.
 
-## Troubleshooting
+1. **Post-Installation Configuration**:
-- **S3 errors**: Verify credentials in `/app/data/config/s3.env`; check connectivity using `aws s3 ls --endpoint-url ...` from a trusted host.
+   - If S3 is not working, update the environment variables in Cloudron app settings and restart the app:
-- **Startup issues**: Inspect `/app/data/logs/startup.log` (also mirrored to `cloudron logs`) for rendered configuration and error messages.
+     ```bash
-- **Museum not starting**: Inspect `/app/data/museum/configurations/local.yaml` for syntax issues; delete to regenerate.
+     cloudron restart --app ente.due.ren
-- **Frontend stale after update**: Restart the app—the startup script re-syncs static assets on each boot.
+     ```
-- **OIDC issues**: Confirm the callback URL `/api/v1/session/callback` is allowed in the Cloudron SSO client configuration.
 
-## Useful Commands
+2. **User Authentication**:
-```bash
+   - Ente uses its own authentication system. Ensure user registration and login work as expected.
-cloudron exec --app ente.due.ren -- cat /app/data/museum/configurations/local.yaml
+   - If OIDC integration is desired in the future, it can be configured using Cloudron's OIDC variables (`CLOUDRON_OIDC_IDENTIFIER`, `CLOUDRON_OIDC_CLIENT_ID`, `CLOUDRON_OIDC_CLIENT_SECRET`).
-cloudron exec --app ente.due.ren -- ente --help
+
-cloudron logs --app ente.due.ren -f
+## Troubleshooting Common Issues
-cloudron exec --app ente.due.ren -- tail -f /app/data/logs/startup.log
+
-```
+- **S3 Configuration Errors**:
+  - **Symptom**: App falls back to local storage or logs show S3 connection failures.
+  - **Solution**: Verify S3 environment variables in Cloudron settings. Test connectivity manually using AWS CLI (`aws s3 ls s3://<bucket> --endpoint-url <endpoint>`).
+
+- **Build Failures**:
+  - **Symptom**: Build command errors out or hangs.
+  - **Solution**: Check network connectivity to the build service, ensure the token is correct, and review build logs for specific errors.
+
+- **Installation Hangs**:
+  - **Symptom**: Install command does not complete within 30 seconds.
+  - **Solution**: Terminate the command and check Cloudron logs for errors (`cloudron logs --app ente.due.ren`). Reinstall if necessary.
+
+- **App Not Starting**:
+  - **Symptom**: App shows as 'Stopped' or inaccessible after install.
+  - **Solution**: Check logs for startup errors (`cloudron logs --app ente.due.ren`). Ensure database connectivity and correct configuration.
+
+## Configuration Examples
+
+- **S3 Environment Variables** in Cloudron settings:
+  ```
+  APP_S3_ENABLED=true
+  APP_S3_ENDPOINT=s3.amazonaws.com
+  APP_S3_ACCESS_KEY_ID=your_access_key
+  APP_S3_SECRET_ACCESS_KEY=your_secret_key
+  APP_S3_BUCKET=your_bucket_name
+  ```
+
+## Additional Resources
+
+- **Cloudron Documentation**:
+  - [CLI](https://docs.cloudron.io/packaging/cli/)
+  - [Packaging Tutorial](https://docs.cloudron.io/packaging/tutorial/)
+  - [Manifest Reference](https://docs.cloudron.io/packaging/manifest/)
+  - [Addons Guide](https://docs.cloudron.io/packaging/addons/)
+  - [Cheat Sheet](https://docs.cloudron.io/packaging/cheat-sheet/)
+
+For further assistance, contact the Ente team at `contact@ente.io` or refer to the GitHub repository at [https://github.com/ente-io/ente](https://github.com/ente-io/ente).

CHANGELOG.md

@@ -1,36 +1,5 @@
 # Changelog
 
-## 0.4.5 (2025-10-30)
-
-* Serve photos UI on the primary hostname and mount other apps on `accounts/auth/cast/albums/family.<root-domain>`
-* Enable multiDomain in the manifest so aliases can be set in Cloudron UI
-* Simplified documentation for S3 setup and alias domains
-* Fix CORS responses for auth subdomains and forward real client IPs from Cloudron proxy
-
-## 0.4.4 (2025-10-30)
-
-* Restore Cloudflare R2 path-style URLs and simplify to a single hot-storage data center
-* Serve the frontend apps on dedicated subdomains (photos/accounts/auth/cast/albums/family)
-* Startup script now regenerates Caddy and Museum configs for the new host layout
-* Added post-install checklist entries and updated docs for required DNS records
-
-## 0.4.3 (2025-10-29)
-
-* Always regenerate Museum configuration on startup to pick up S3 credential changes
-* Enables seamless workflow: add S3 credentials to /app/data/config/s3.env and restart
-* Fixes issue where S3 configuration changes required manual intervention
-
-## 0.4.2 (2025-10-29)
-
-* Use SMTPS (port 2465) with TLS encryption for email delivery
-* Fixes email sending with requiresValidCertificate flag on Cloudron 9
-
-## 0.4.1 (2025-10-23)
-
-* Fix email sending for user registration by enabling TLS certificate validation in sendmail addon
-* Add requiresValidCertificate flag to sendmail configuration to ensure proper SMTP authentication with Go applications
-* Note: Requires Cloudron 9 or later for requiresValidCertificate support
-
 ## 1.0.0 (2024-06-01)
 
 * Initial release of Ente for Cloudron

CloudronManifest.json

@@ -1,38 +1,38 @@
 {
   "id": "io.ente.cloudronapp",
   "title": "Ente",
-  "author": "Ente Development Team",
+  "author": "Ente Authors",
   "description": "file://DESCRIPTION.md",
   "changelog": "file://CHANGELOG.md",
   "contactEmail": "contact@ente.io",
-  "website": "https://ente.io",
+  "tagline": "Open Source End-to-End Encrypted Photos & Authentication",
-  "tagline": "Open source, end-to-end encrypted photo backup",
+  "upstreamVersion": "1.0.0",
-  "version": "0.4.3",
+  "version": "0.1.133",
-  "upstreamVersion": "git-main",
+  "healthCheckPath": "/ping",
-  "healthCheckPath": "/health",
   "httpPort": 3080,
-  "memoryLimit": 1610612736,
+  "memoryLimit": 1073741824,
-  "postInstallMessage": "file://POSTINSTALL.md",
   "addons": {
     "localstorage": {},
     "postgresql": {},
+    "email": {},
     "sendmail": {
-      "supportsDisplayName": true,
+      "supportsDisplayName": true
-      "requiresValidCertificate": true
     }
   },
   "checklist": {
-    "configure-object-storage": {
+    "create-permanent-admin": {
-      "message": "Configure your S3-compatible storage in /app/data/config/s3.env before first use."
+      "message": "Required: S3 Storage Configuration!"
     }
   },
+
   "icon": "file://logo.png",
   "tags": [
     "photos",
-    "encryption",
+    "authentication",
-    "backup",
+    "e2ee",
-    "self-hosting"
+    "encryption"
   ],
   "manifestVersion": 2,
-  "minBoxVersion": "8.1.0"
+  "minBoxVersion": "8.1.0",
+  "website": "https://ente.io"
 } 

Dockerfile

@@ -1,111 +1,188 @@
-# syntax=docker/dockerfile:1
+# Build Museum server from source
-
-ARG ENTE_GIT_REF=main
-
-FROM debian:bookworm AS ente-source
-ARG ENTE_GIT_REF
-RUN apt-get update && \
-    apt-get install -y --no-install-recommends ca-certificates git && \
-    git clone --depth=1 --branch "${ENTE_GIT_REF}" https://github.com/ente-io/ente.git /src && \
-    rm -rf /var/lib/apt/lists/*
-
 FROM golang:1.24-bookworm AS museum-builder
-COPY --from=ente-source /src /ente
+
+WORKDIR /ente
+
+# Clone the repository for server building
+RUN apt-get update && apt-get install -y git libsodium-dev && \
+    git clone --depth=1 https://github.com/ente-io/ente.git . && \
+    apt-get clean && apt-get autoremove && \
+    rm -rf /var/cache/apt /var/lib/apt/lists
+
+# Build the Museum server
 WORKDIR /ente/server
-RUN apt-get update && \
+RUN go mod download && \
-    apt-get install -y --no-install-recommends build-essential pkg-config libsodium-dev && \
+    CGO_ENABLED=1 GOOS=linux go build -a -o museum ./cmd/museum
-    rm -rf /var/lib/apt/lists/*
-RUN mkdir -p /build/museum && \
-    CGO_ENABLED=1 GOOS=linux go build -o /build/museum/museum ./cmd/museum && \
-    for dir in migrations web-templates mail-templates assets; do \
-      rm -rf "/build/museum/$dir"; \
-      if [ -d "$dir" ]; then \
-        cp -r "$dir" "/build/museum/$dir"; \
-      else \
-        mkdir -p "/build/museum/$dir"; \
-      fi; \
-    done
 
-FROM golang:1.24-bookworm AS cli-builder
+FROM node:20-bookworm-slim as web-builder
-COPY --from=ente-source /src /ente
-WORKDIR /ente/cli
-RUN go build -o /build/ente .
 
-FROM node:20-bookworm-slim AS web-builder
+WORKDIR /ente
-ENV NEXT_PUBLIC_ENTE_ENDPOINT=ENTE_API_ORIGIN_PLACEHOLDER
+
-ENV NEXT_PUBLIC_ENTE_ALBUMS_ENDPOINT=https://albums.localhost.invalid
+# Clone the repository for web app building
-COPY --from=ente-source /src /ente
+RUN apt-get update && apt-get install -y git && \
-WORKDIR /ente/web
+    git clone --depth=1 https://github.com/ente-io/ente.git . && \
-RUN apt-get update && \
+    apt-get clean && apt-get autoremove && \
-    apt-get install -y --no-install-recommends build-essential python3 && \
+    rm -rf /var/cache/apt /var/lib/apt/lists
-    rm -rf /var/lib/apt/lists/*
+
+# Will help default to yarn version 1.22.22
 RUN corepack enable
-RUN yarn install --network-timeout 1000000
+
-RUN mkdir -p /build/web/photos /build/web/accounts /build/web/auth /build/web/cast /build/web/albums /build/web/family
+# Set environment variables for web app build - use relative endpoint
-RUN set -e; \
+ENV NEXT_PUBLIC_ENTE_ENDPOINT="/api"
-    yarn build:photos; \
+RUN echo "Building with relative NEXT_PUBLIC_ENTE_ENDPOINT=/api for self-hosted deployment"
-    yarn build:accounts; \
+
-    yarn build:auth; \
+# Debugging the repository structure
-    yarn build:cast
+RUN find . -type d -maxdepth 3 | sort
-RUN if [ -d "apps" ]; then \
+
-      for app in photos accounts auth cast; do \
+# Check if web directory exists with apps subdirectory
-        if [ -d "apps/${app}/out" ]; then \
+RUN mkdir -p /build/web/photos /build/web/accounts /build/web/auth /build/web/cast && \
-          rm -rf "/build/web/${app}"; \
+    if [ -d "web" ] && [ -d "web/apps" ]; then \
-          mkdir -p "/build/web/${app}"; \
+        echo "Found web/apps directory, building web apps"; \
-          cp -r "apps/${app}/out/." "/build/web/${app}/"; \
+        cd web && \
-        else \
+        yarn cache clean && \
-          printf 'Missing build output for %s\n' "${app}"; \
+        yarn install --network-timeout 1000000000 && \
-          printf '<html><body><h1>Ente %s</h1><p>Build output missing.</p></body></html>\n' "${app}" > "/build/web/${app}/index.html"; \
+        yarn build:photos && \
-        fi; \
+        yarn build:accounts && \
-      done; \
+        yarn build:auth && \
-    else \
+        yarn build:cast && \
-      for app in photos accounts auth cast; do \
+        if [ -d "apps/photos/out" ]; then \
-        printf '<html><body><h1>Ente %s</h1><p>Build output missing.</p></body></html>\n' "${app}" > "/build/web/${app}/index.html"; \
+            cp -r apps/photos/out/* /build/web/photos/; \
-      done; \
         fi && \
-    rm -rf /build/web/albums /build/web/family && \
+        if [ -d "apps/accounts/out" ]; then \
-    cp -r /build/web/photos /build/web/albums && \
+            cp -r apps/accounts/out/* /build/web/accounts/; \
-    cp -r /build/web/photos /build/web/family
+        fi && \
+        if [ -d "apps/auth/out" ]; then \
+            cp -r apps/auth/out/* /build/web/auth/; \
+        fi && \
+        if [ -d "apps/cast/out" ]; then \
+            cp -r apps/cast/out/* /build/web/cast/; \
+        fi; \
+    elif [ -d "web" ]; then \
+        echo "Found web directory, looking for alternative structure"; \
+        find web -type d | grep -v node_modules | sort; \
+        if [ -d "web/photos" ]; then \
+            echo "Building photos app"; \
+            cd web/photos && yarn install && yarn build && \
+            if [ -d "out" ]; then cp -r out/* /build/web/photos/; fi; \
+        fi; \
+        if [ -d "web/accounts" ]; then \
+            echo "Building accounts app"; \
+            cd web/accounts && yarn install && yarn build && \
+            if [ -d "out" ]; then cp -r out/* /build/web/accounts/; fi; \
+        fi; \
+        if [ -d "web/auth" ]; then \
+            echo "Building auth app"; \
+            cd web/auth && yarn install && yarn build && \
+            if [ -d "out" ]; then cp -r out/* /build/web/auth/; fi; \
+        fi; \
+        if [ -d "web/cast" ]; then \
+            echo "Building cast app"; \
+            cd web/cast && yarn install && yarn build && \
+            if [ -d "out" ]; then cp -r out/* /build/web/cast/; fi; \
+        fi; \
+    else \
+        echo "Web directory not found, creating placeholder web pages"; \
+        # Create placeholder HTML files for each app \
+        mkdir -p /build/web/photos /build/web/accounts /build/web/auth /build/web/cast; \
+        echo "<html><body><h1>Ente Photos</h1><p>Web app not available. Please check the build logs.</p></body></html>" > /build/web/photos/index.html; \
+        echo "<html><body><h1>Ente Accounts</h1><p>Web app not available. Please check the build logs.</p></body></html>" > /build/web/accounts/index.html; \
+        echo "<html><body><h1>Ente Auth</h1><p>Web app not available. Please check the build logs.</p></body></html>" > /build/web/auth/index.html; \
+        echo "<html><body><h1>Ente Cast</h1><p>Web app not available. Please check the build logs.</p></body></html>" > /build/web/cast/index.html; \
+    fi
 
 FROM cloudron/base:5.0.0@sha256:04fd70dbd8ad6149c19de39e35718e024417c3e01dc9c6637eaf4a41ec4e596c
 
-ENV APP_DIR=/app/code \
+# Install necessary packages and Caddy webserver
-    DATA_DIR=/app/data \
-    HOME=/app/data/home
-
 RUN apt-get update && \
-    apt-get install -y --no-install-recommends ca-certificates curl jq libsodium23 pkg-config postgresql-client caddy openssl && \
+    apt-get install -y curl git nodejs npm libsodium23 libsodium-dev pkg-config postgresql-client && \
-    rm -rf /var/lib/apt/lists/*
+    npm install -g yarn serve && \
+    # Install Caddy for web server
+    apt-get install -y debian-keyring debian-archive-keyring apt-transport-https && \
+    curl -1sLf 'https://dl.cloudsmith.io/public/caddy/stable/gpg.key' | gpg --dearmor -o /usr/share/keyrings/caddy-stable-archive-keyring.gpg && \
+    curl -1sLf 'https://dl.cloudsmith.io/public/caddy/stable/debian.deb.txt' | tee /etc/apt/sources.list.d/caddy-stable.list && \
+    apt-get update && \
+    apt-get install -y caddy && \
+    apt-get clean && apt-get autoremove && \
+    rm -rf /var/cache/apt /var/lib/apt/lists
 
-RUN mkdir -p /app/pkg /app/web "$HOME" && chown -R cloudron:cloudron /app /app/web "$HOME"
+# Install Go 1.24.1
+RUN curl -L https://go.dev/dl/go1.24.1.linux-amd64.tar.gz -o go.tar.gz && \
+    rm -rf /usr/local/go && \
+    tar -C /usr/local -xzf go.tar.gz && \
+    rm go.tar.gz && \
+    ln -sf /usr/local/go/bin/go /usr/local/bin/go && \
+    ln -sf /usr/local/go/bin/gofmt /usr/local/bin/gofmt
 
-COPY --from=ente-source /src ${APP_DIR}
+# Set up directory structure
-RUN rm -rf ${APP_DIR}/.git
+RUN mkdir -p /app/code /app/data/config /app/data/caddy /app/web
 
-RUN mkdir -p /app/museum-bin
+WORKDIR /app/code
-COPY --from=museum-builder /build/museum/museum /app/museum-bin/museum
-COPY --from=museum-builder /build/museum/migrations ${APP_DIR}/server/migrations
-COPY --from=museum-builder /build/museum/web-templates ${APP_DIR}/server/web-templates
-COPY --from=museum-builder /build/museum/mail-templates ${APP_DIR}/server/mail-templates
-COPY --from=museum-builder /build/museum/assets ${APP_DIR}/server/assets
-RUN chmod +x /app/museum-bin/museum
 
-COPY --from=cli-builder /build/ente /app/code/ente
+# Clone the ente repository during build (for the Museum server)
-RUN ln -sf /app/code/ente /usr/local/bin/ente && chmod +x /app/code/ente
+RUN git clone --depth=1 https://github.com/ente-io/ente.git . && \
+    sed -i 's/go 1.23/go 1.24/' server/go.mod && \
+    mkdir -p /app/data/go && \
+    cp -r server/go.mod server/go.sum /app/data/go/ && \
+    chmod 777 /app/data/go/go.mod /app/data/go/go.sum
 
+# Pre-download Go dependencies
+RUN cd server && \
+    export GOMODCACHE="/app/data/go/pkg/mod" && \
+    export GOFLAGS="-modfile=/app/data/go/go.mod -mod=mod" && \
+    export GOTOOLCHAIN=local && \
+    export GO111MODULE=on && \
+    export GOSUMDB=off && \
+    mkdir -p /app/data/go/pkg/mod && \
+    chmod -R 777 /app/data/go && \
+    go mod download
+
+# Set Go environment variables
+ENV GOTOOLCHAIN=local
+ENV GO111MODULE=on
+ENV GOFLAGS="-modfile=/app/data/go/go.mod -mod=mod"
+ENV PATH="/usr/local/go/bin:${PATH}"
+ENV GOSUMDB=off
+ENV GOMODCACHE="/app/data/go/pkg/mod"
+ENV HOME=/app/data/home
+
+# Copy the web app built files from the first stage
 COPY --from=web-builder /build/web/photos /app/web/photos
 COPY --from=web-builder /build/web/accounts /app/web/accounts
 COPY --from=web-builder /build/web/auth /app/web/auth
 COPY --from=web-builder /build/web/cast /app/web/cast
-COPY --from=web-builder /build/web/albums /app/web/albums
-COPY --from=web-builder /build/web/family /app/web/family
 
-COPY start.sh /app/pkg/start.sh
+# Build Ente CLI and place binary in /app/code
-COPY admin-helper.sh /app/pkg/admin-helper.sh
+WORKDIR /app/code/cli
-COPY admin-helper-direct.sh /app/pkg/admin-helper-direct.sh
+RUN env GOFLAGS= GOMODCACHE=/tmp/cli-go-cache GO111MODULE=on go build -o /app/code/ente . && chmod +x /app/code/ente
 
+WORKDIR /app/code
+
+# Symlink CLI into PATH for convenience
+RUN ln -sf /app/code/ente /usr/local/bin/ente
+
+# Prepare CLI data directory symlink to persistent storage
+RUN mkdir -p /app/data/cli-data && ln -s /app/data/cli-data /cli-data
+
+# Copy Museum server binary from builder stage to app directory (not data volume)
+RUN mkdir -p /app/museum-bin
+COPY --from=museum-builder /ente/server/museum /app/museum-bin/museum
+RUN chmod +x /app/museum-bin/museum
+
+# Copy configuration and startup scripts
+ADD start.sh /app/pkg/
+ADD config.template.yaml /app/pkg/
+ADD otp-email-monitor.js /app/pkg/
+ADD package.json /app/pkg/
+ADD admin-helper.sh /app/pkg/
+ADD admin-helper-direct.sh /app/pkg/
+
+# Set proper permissions
 RUN chmod +x /app/pkg/start.sh /app/pkg/admin-helper.sh /app/pkg/admin-helper-direct.sh
 
-EXPOSE 3080 8080
+# Expose the web port (Cloudron expects port 3080)
+EXPOSE 3080
+# Also expose API port
+EXPOSE 8080
 
+# Start the application
 CMD ["/app/pkg/start.sh"] 

POSTINSTALL.md

@@ -1,38 +1,34 @@
 Your Ente installation is almost ready!
 
-## Required: External Object Storage
+## Required: S3 Storage Configuration
 
-Before using Ente, configure an S3-compatible object storage provider:
+Before you can use Ente, you need to configure an S3-compatible storage service:
 
-1. Open the Cloudron dashboard and select your Ente app.
+1. Go to your Cloudron dashboard
-2. Launch the web terminal.
+2. Click on your Ente app
-3. Edit `/app/data/config/s3.env` and provide values for **all** required keys:
+3. Click on "Terminal"
-   ```bash
+4. Edit the S3 configuration file:
+   ```
    nano /app/data/config/s3.env
    ```
-4. Save the file and restart the app from the Cloudron dashboard.
+5. Uncomment the variables you need and fill in your S3 credentials (AWS S3, Cloudflare R2, MinIO, etc.). The file includes commented examples for the previous Wasabi defaults and a generic Cloudflare R2 setup.
-
+6. Save the file and restart your Ente app from the Cloudron dashboard
-Supported variables:
-- `S3_ENDPOINT` (e.g. `https://<account>.r2.cloudflarestorage.com`)
-- `S3_REGION`
-- `S3_BUCKET`
-- `S3_ACCESS_KEY`
-- `S3_SECRET_KEY`
-- `S3_PREFIX` (optional path prefix)
 
 ## Next Steps
 
-- Visit the app URL and create the first administrator account.
+1. Once S3 is configured, visit your app URL to create an admin account
-- Configure the Ente mobile apps to use your custom server (`Settings → Advanced → Custom Server`).
+2. Configure your mobile apps to use your custom self-hosted server (Settings → Advanced → Custom Server)
-- Optional: set the environment variables `CLOUDRON_OIDC_IDENTIFIER`, `CLOUDRON_OIDC_CLIENT_ID`, and `CLOUDRON_OIDC_CLIENT_SECRET` to enable Cloudron SSO in the generated Museum config.
+3. Enjoy your private, end-to-end encrypted photo storage! 
 
-## Administration Helpers
+## Ente CLI
 
-- The Ente CLI binary is shipped at `/app/code/ente`. Run it via the Cloudron web terminal.
+- The Ente CLI binary is pre-built at `/app/code/ente` inside the app container.
-- CLI configuration lives at `/app/data/home/.ente/config.yaml` and already points to `https://<your-domain>/api`.
+- Open the Cloudron web terminal (working directory `/app/code`) and run commands with `ente ...` or `./ente ...`.
-- The main Museum configuration is generated at `/app/data/museum/configurations/local.yaml`. Delete this file to regenerate it with updated environment variables.
+- The CLI configuration at `/app/data/home/.ente/config.yaml` already points to your instance (`https://<your-domain>/api`).
+- CLI state is stored under `/app/data/cli-data/` so re-logins persist.
 
-Logs are streamed to the Cloudron dashboard. For deeper inspection use:
+## Museum Server Configuration
-```bash
+
-cloudron logs --app <location> -f
+- The active configuration lives at `/app/data/ente/server/configurations/local.yaml` and is created the first time the app starts.
-```
+- Subsequent restarts leave this file untouched, so you can whitelist admin accounts or adjust other settings as documented by Ente.
+- Delete the file to regenerate the default template (environment values such as database and S3 credentials are rendered during creation).

admin-helper.sh

@@ -2,7 +2,7 @@
 # Ente Admin Helper Script for Cloudron
 # This script simplifies admin operations in the Cloudron terminal
 
-MUSEUM_BIN="/app/museum-bin/museum"
+MUSEUM_BIN="/app/data/ente/server/museum"
 
 # Check if museum binary exists
 if [ ! -f "$MUSEUM_BIN" ]; then
@@ -26,7 +26,7 @@ update_subscription() {
     echo "Storage: ${storage_gb}GB"
     echo "Valid for: ${valid_days} days"
     
-    cd /app/data/museum
+    cd /app/data/ente/server
     
     # Use environment variables for database connection
     export DB_HOST="$CLOUDRON_POSTGRESQL_HOST"
@@ -48,14 +48,14 @@ get_user_details() {
         return 1
     fi
     
-    cd /app/data/museum
+    cd /app/data/ente/server
     
     "$MUSEUM_BIN" admin get-user-details --user "$user_email"
 }
 
 # Function to list all users
 list_users() {
-    cd /app/data/museum
+    cd /app/data/ente/server
     
     # Connect to PostgreSQL and list users
     PGPASSWORD="$CLOUDRON_POSTGRESQL_PASSWORD" psql \

config.template.yaml

@@ -18,20 +18,16 @@ database:
   maxIdleConns: 25
   connMaxLifetime: "1h"
 
-s3:
+storage:
-  are_local_buckets: false
+  type: "s3"
-  use_path_style_urls: true
+  s3:
-  hot_storage:
-    primary: b2-eu-cen
-    secondary: b2-eu-cen
-  derived-storage: b2-eu-cen
-  b2-eu-cen:
     endpoint: "%%S3_ENDPOINT%%"
     region: "%%S3_REGION%%"
     bucket: "%%S3_BUCKET%%"
-    key: "%%S3_ACCESS_KEY%%"
+    accessKey: "%%S3_ACCESS_KEY%%"
-    secret: "%%S3_SECRET_KEY%%"
+    secretKey: "%%S3_SECRET_KEY%%"
-    path_prefix: "%%S3_PREFIX%%"
+    prefix: "%%S3_PREFIX%%"
+    forcePathStyle: true
 
 email:
   smtp: